DIY Herringbone Chair

You guys, it’s just about a miracle- I actually have a project to share with you today. I know, I know, it’s been a while. Let’s just go ahead and blame summertime for that and not my laziness.

Anyways- on with the show! I’ve got a sweet chair to show you.

The night of my bachlorette party we passed a busted up old chair on the sidewalk while we were walking to the train station. So obviously I grabbed it and put it in my trunk. I have a chair hoarding problem

before Collage

 

The chair was a hot mess- dinged, scratched, a little broken, and it stunk like cigarettes. But I loved the style of the seat. I had to have it. When I got home I sanded it like crazy then wiped it down with white vinegar (usually I use a cloth dampened with water, but white vinegar will get rid of the smoke smell and dry odorless). Once it was dry I repaired the broken seat slat with gorilla glue.

The seat wasn’t actually even attached to the base of the chair, which made things a bit easier for me. I placed the seat and the base next to each other and sprayed them both with two coats of Rustoleum spray primer, then I painted the base with 2 coats of City Nights by Clark + Kensington (Ace brand, leftover from the basement redo).

Then I took the seat inside to work some magic.

IMG_2601

 

I didn’t measure out the herringbone pattern, I just eyeballed it. Basically I ripped strips of frog tape and reverse zig zagged them on the seat, using a letter opener to squish the tape into the spaces between the slats. This took patience. Once when it was all on there I used my finger to press down the tape strips one more time, just to make sure it was on good.

Once it was all taped up, I gave the chair 2 coats of City Nights and immediately removed the tape, again using the letter opener. When it was dry I did a little touch up work with an artist brush and some white paint- frog tape is awesome and usually doesn’t bleed, but there was just so much tape here I missed a few spots when I went over it with my finger.

LOVE.

LOVE.

 

I am so pleased with how this chair turned out! As soon as all the paint was dry I sprayed it with 3 coats of acrylic sealer (ModPodge brand). I may still do a coat of polycrylic on the seat, just to make sure it’s protected.

IMG_2606

 

The home for this chair doesn’t exist yet, but it will! I’ve got big plans for the guest room and one day I’ll execute them… maybe sometime in the next year. haha!

IMG_2605

 

What do you think? Do you have any cool patterned chairs or painted furniture? Are you shocked I have, once again, not painted a piece of furniture white?

Advertisements

17 thoughts on “DIY Herringbone Chair

  1. Pingback: Formal Dining Room Mood Board | Sandpaper & Glue

  2. So neat, I was admiring the nice green color as I was scrolling. Then I realized that was the frog tape!
    Like the blue, too!

Comments are closed.